menace13 0 Posted August 28, 2005 Share Posted August 28, 2005 (edited) Right here's the problem.. For those who use DC++ you know there is 2 modes,Active Mode and Passive Mode,and Passive Mode is so fucking shit it's unbelievable,well I'm behind a router and I've forwaded ports so I can use Active Mode and it worked fine..Now here's the tricky bit,my brother wants to use Active Mode also.. But I've gotta use the Internet IP Address off my router to get DC++ to get to work on Active Mode,now to put it more easier..2 computers 1 IP adress and 1 Person can work it the other can't and also when I try and search nothing comes up,I really don't want to use Passive Mode as I hate it. Help? Edited August 28, 2005 by menace13 Link to comment Share on other sites More sharing options...
Matt 0 Posted August 28, 2005 Share Posted August 28, 2005 You could looks for an ISP that gives you 2 IPs as part of the deal. Have you got NAT turned on? Link to comment Share on other sites More sharing options...
peasepud 59 Posted August 28, 2005 Share Posted August 28, 2005 have you tried setting the wotsit then poking the thingummyjig a little, if that dont work then twiddle the diddlywatchamacallit a bit. Link to comment Share on other sites More sharing options...
menace13 0 Posted August 28, 2005 Author Share Posted August 28, 2005 You could looks for an ISP that gives you 2 IPs as part of the deal. Have you got NAT turned on? 20497[/snapback] How do I do that? Link to comment Share on other sites More sharing options...
Holden McGroin 6585 Posted August 29, 2005 Share Posted August 29, 2005 (edited) You cannot have 2 identical IP addresses on a network. If you turn NAT on (which I think you may have done as you are port forwarding), on the router then you can have as many internal IP addresses you want. What IP addresses are you using? Give me numbers ! Edited August 29, 2005 by Holden McGroin Link to comment Share on other sites More sharing options...
adios 717 Posted August 29, 2005 Share Posted August 29, 2005 Use different ports. Eg. Computer A 10.0.1.2 Computer B 10.0.1.3 Forward port 6681 to 10.0.1.2 Forward port 6682 to 10.0.1.3 Then just set up the different ports in the DC++ on each computer. Link to comment Share on other sites More sharing options...
Guest Sima Posted August 29, 2005 Share Posted August 29, 2005 have you tried setting the wotsit then poking the thingummyjig a little, if that dont work then twiddle the diddlywatchamacallit a bit. 20552[/snapback] He's already tried that Link to comment Share on other sites More sharing options...
adios 717 Posted September 6, 2005 Share Posted September 6, 2005 Use different ports. Eg. Computer A 10.0.1.2 Computer B 10.0.1.3 Forward port 6681 to 10.0.1.2 Forward port 6682 to 10.0.1.3 Then just set up the different ports in the DC++ on each computer. 21041[/snapback] Did that work? Link to comment Share on other sites More sharing options...
menace13 0 Posted September 12, 2005 Author Share Posted September 12, 2005 (edited) Seems to work now.. Both my brother and I can download & search. He's using Ports 412 and I'm using ports 411.. Thanks everyone. Edited September 12, 2005 by menace13 Link to comment Share on other sites More sharing options...
adios 717 Posted September 12, 2005 Share Posted September 12, 2005 Should do, why not? Link to comment Share on other sites More sharing options...
menace13 0 Posted January 9, 2006 Author Share Posted January 9, 2006 (edited) Sorry to bump a old thread, but the problem was never fixed, again sorry about this. My router doesn't seem to support NAT? It's a Linksys BEFSR41 V3 wired. Here's a pic of the ports being forwaded my IP is the one with .100 at the end and my brothers is .101 Also, say if my brother is inside a hub, I can't join that hub, it says I'm already in it? Thanks! Edited January 9, 2006 by menace13 Link to comment Share on other sites More sharing options...
themags 0 Posted January 9, 2006 Share Posted January 9, 2006 is this of any help to you mate, i know it's for v2 but should offer some sort of help http://www.portforward.com/english/routers...SR41v2/DC++.htm Link to comment Share on other sites More sharing options...
menace13 0 Posted January 9, 2006 Author Share Posted January 9, 2006 You fucking legend! It worked, thank fuck for that! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now